Interlock Panel Clad

REYNOLDS ROOFING
TRS INTERLOCKING PANEL
Trusted Choice For Developers, Builders, Plumbers and Home Owners On The North Island

TRS Interlocking Wall Cladding

The panels are simply connected by the use of an interlocking groove, giving the elegant appearance of a recessed joint. Interlocking Panels do not require a plywood substrate, they are fixed onto 20 mm cavity battens using mechanical fixings which are concealed in the joint.

This system can be installed either horizontally or vertically over synthetic building wrap and 20 mm cavity battens. (same as timber weatherboards)

Applications

Interlocking panels are ideal for use on new homes or existing buildings. They are installed as conventional weatherboard planks, resembling the look of a Rusticated Weatherboard wood paneling.

Areas of application could include:

Facade
Soffits
Fascias
Chimney Cladding
Interior Feature Walls

Panel Details

Suitable for wall cladding ONLY;

Negative joint size – 2 – 25 mm;

Variable Pan size from 155 – 260 mm unsupported;

Pan size over 260 mm (not recommended) will require back support. We will use fire rated POLYFOAM 24 mm;

Max panel length – 6.0 m for pre-painted steel; 4.0 m for any other material;

Can be manufactured in following materials only:

Copper
Stainless Steel
Titanium Zinc
Aluminum
Vitor+, Vitor+ ZX or LUX

Dimensions

Panel depth is fixed to 24 mm. Flat pan is variable from 155 to 260 mm with no back support. For pan width over 260 mm, backing is required. Max width 400 mm. Recessed joint width is adjustable from 2 to 25 mm.

Maximum panel length will depend on the material chosen. Thermal expansion / contraction are the key deciding factors. We will recommend max 4.0 lengths for Copper, Zinc, Aluminum or Stainless Steel. For any pre-painted steel we will recommend 6.0 m maximum.